XG1 2015-20 Acura Connecting Rod Bearing Stop Sale: What You Need to Know

In 2021, Honda issued a stop-sale order for certain 2015-2020 Acura vehicles equipped with the 2.4L XG1 engine due to a potential issue with connecting rod bearing failure.

Understanding the Issue

The connecting rod bearings are critical components that connect the piston to the crankshaft, allowing for smooth engine operation. In the affected Acura models, a manufacturing defect could lead to premature wear on these bearings, potentially resulting in engine damage or failure.

Key Facts

Affected Vehicles: 2015-2020 Acura ILX, TLX, and Accord models with the 2.4L XG1 engine

Number of Vehicles Affected: Approximately 38,277 in the United States

Potential Consequences: Engine damage or failure, leading to costly repairs or replacement

Symptoms and Diagnosis

Vehicles with the XG1 engine may exhibit the following symptoms:

Knocking or rattling noises from the engine, especially during acceleration or under load

Reduced engine power or hesitation

Check Engine light illumination

If you experience any of these issues, it's crucial to have your vehicle inspected by an authorized Acura dealer immediately to confirm or rule out the presence of connecting rod bearing failure.

Diagnostic Tips

Listen for unusual noises: Pay attention to any knocking or rattling sounds coming from the engine, particularly when the vehicle is under stress.

Monitor engine performance: Note any changes in power output or hesitation, as these could indicate a bearing issue.

Check for warning lights: If the Check Engine light illuminates, have the vehicle diagnosed promptly.

Repair and Resolution

Honda has developed a repair procedure to address the connecting rod bearing issue in the affected Acura models. The repair involves replacing the affected engine components and ensuring proper lubrication. The repair costs are covered under the vehicle's warranty or extended warranty if applicable.

Repair Costs

Warranty Coverage: The repair is covered under the vehicle's bumper-to-bumper warranty for vehicles within the warranty period.

Extended Warranty: Vehicles with extended warranties may also have coverage for this repair.

Out-of-Warranty Vehicles: Owners of out-of-warranty vehicles will be responsible for the repair costs, which can vary depending on the severity of the issue.

Success Stories

Case 1: An owner of a 2018 Acura ILX reported knocking noises from the engine. Upon inspection, the dealer confirmed connecting rod bearing failure and performed the repair under warranty. The vehicle now operates smoothly with no issues.

Case 2: A 2019 Acura TLX owner experienced reduced engine power and hesitation. The issue was diagnosed as connecting rod bearing failure, and the vehicle was repaired at no cost under the extended warranty. The owner is now satisfied with the performance of their vehicle.

Case 3: A 2020 Acura Accord owner observed the Check Engine light illuminated. The vehicle was diagnosed with connecting rod bearing failure, and the repairs were covered under the manufacturer's bumper-to-bumper warranty. The Accord now runs flawlessly.

Effective Strategies, Tips, and Tricks

Regular Maintenance: Adhere to the manufacturer's recommended maintenance schedule to ensure optimal engine health.

Listen to Your Engine: Pay attention to any unusual noises or changes in performance, as they could indicate potential issues.

Professional Inspections: Have your vehicle inspected regularly by an authorized Acura dealer to identify any potential problems early on.

Common Mistakes to Avoid

Ignoring Symptoms: Do not ignore any unusual noises or performance issues with your engine, as they could lead to more serious damage.

Delaying Repairs: If your vehicle exhibits symptoms of connecting rod bearing failure, do not hesitate to schedule an appointment for inspection and repair.

Unauthorized Repairs: Trust only authorized Acura dealers to perform repairs on your vehicle to ensure the use of genuine parts and proper procedures.

Challenges and Limitations

Time-Consuming Repairs: The repair process for connecting rod bearing failure can be time-consuming, as it involves disassembling and reassembling significant engine components.

Warranty Coverage: Vehicles outside of their warranty period or extended warranty may incur significant repair costs.

Potential for Recurrence: In rare cases, connecting rod bearing failure may recur after repair, necessitating further diagnosis and repairs.

Potential Drawbacks

Reduced Vehicle Value: Connecting rod bearing failure can impact the resale value of the affected vehicles.

Vehicle Downtime: While repairs are being performed, the vehicle will be out of service.

Risk of Catastrophic Engine Damage: Neglecting to address connecting rod bearing failure can lead to severe engine damage or failure, potentially resulting in a total loss of the vehicle.

Mitigating Risks

Regular Monitoring: Monitor your vehicle's engine performance and listen for any unusual noises to detect potential issues early on.

Extended Warranty: Consider purchasing an extended warranty to cover potential repair costs for connecting rod bearing failure after the manufacturer's warranty expires.

Authorized Repairs: Ensure that all repairs are performed by authorized Acura dealers to maintain your vehicle's integrity and preserve its value.

Industry Insights

According to Edmunds, connecting rod bearing failure can be a costly repair, with average costs ranging from $3,000 to $5,000.

Consumer Reports noted that connecting rod bearing failure is a serious issue that can lead to engine damage and recommends prompt attention if any symptoms arise.

Maximizing Efficiency

Early Detection: Catching connecting rod bearing failure early on through regular monitoring can prevent more extensive damage and reduce repair costs.

Proper Lubrication: Ensure that the engine oil is maintained at the proper level and viscosity to minimize friction and bearing wear.

Dealer Communication: Stay informed about potential recalls or service bulletins related to connecting rod bearing failure and contact your dealer promptly if any issues arise.

Pros and Cons

Pros:

Enhanced Engine Performance: Replacing worn connecting rod bearings can restore engine performance and prevent further damage.

Coverage Under Warranty: Most affected vehicles are covered under warranty or extended warranty, reducing repair costs.

Avoidance of Engine Failure: Addressing connecting rod bearing failure early on can prevent catastrophic engine damage and potential replacement.

Cons:

Time-Consuming Repairs: Replacing connecting rod bearings requires extensive disassembly and reassembly, leading to increased labor costs.

Potential for Recurrence: In rare cases, connecting rod bearing failure may recur after repair.

Impact on Resale Value: Disclosing a history of connecting rod bearing failure can affect the vehicle's resale value.

Making the Right Choice

If your 2015-20 Acura vehicle is experiencing symptoms of connecting rod bearing failure, it is crucial to have the issue diagnosed and repaired as soon as possible. Following the tips and strategies outlined in this article can help you mitigate risks, maximize efficiency, and make an informed decision about the best course of action.

Tables

Symptom	Potential Cause
Knocking or rattling noises from the engine	Worn connecting rod bearings
Reduced engine power or hesitation	Excess friction due to worn bearings
Check Engine light illumination	Engine control unit detecting bearing failure

Repair Option	Cost	Coverage
Warranty Repair	No cost	Vehicles within the warranty period
Extended Warranty Repair	May vary	Vehicles with extended warranty
Out-of-Warranty Repair	$3,000-$5,000	Vehicles without warranty or extended warranty

XG1 2015-20 Acura Connecting Rod Bearing Stop Sale: What You Need to Know